Dismantling the outer roof and rear window
WARNING: This page is about a different car, the 2011 Saab 9-3 and 2010 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Place the complete outer roof and rear window on a work bench. Manufacture a tool as illustrated.
- Lift up the clip with the tool and place a knife underneath. Pull out the clip with the tool, following after with the knife to protect the window frame.
- Continue in the same manner with the remaining clips.
- Lift away the window and change the outer roof, rear window or rear window seal as necessary.