Position sensor, first bow ready to lock (561): Removing

WARNING: This page is about a different car, the 2011 Saab 9-3 and 2010 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Only the latch fitting on the left-hand side of the windscreen frame has position sensors.

Remove Windscreen frame upper trim, CV. See WINDSCREEN FRAME UPPER TRIM, CV .
Unplug the position sensor connector.

Fig 1: Removing Position Sensor Connector
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the position sensor by pressing in the lock tab with a screwdriver.