LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-3X Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Convertible Top) >> Repair Instructions >> Position sensor, first bow ready to lock (561) >> Fitting

Position sensor, first bow ready to lock (561): Fitting

WARNING: This page is about a different car, the 2011 Saab 9-3 and 2010 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the position sensor.
    Fig 1: Illustration For Step 1-2
    G05063579Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Plug in the position sensor connector.
  3. Fit the Windscreen frame upper trim. See WINDSCREEN FRAME UPPER TRIM, CV .
  4. Test the operation of the soft top.
  5. Connect the diagnostics tool and erase any diagnostic trouble code.
scientia non olet · About LEMON Manuals