LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2010 >> 9-3X Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Convertible Top) >> Repair Instructions >> Latch fittings, windscreen frame >> Removing

Latch fittings, windscreen frame: Removing

WARNING: This page is about a different car, the 2011 Saab 9-3 and 2010 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Windscreen frame upper trim, CV. See WINDSCREEN FRAME UPPER TRIM, CV .
  2. Left-hand side:  Unplug the position sensor connector.
    Fig 1: Illustration For Step 2-3 And 5
    G05063639Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Remove the bolts for the latch fitting.
  4. Remove the latch fitting.
  5. Left-hand side:  Remove the position sensor where appropriate by pressing in the lock tab with a screwdriver.
scientia non olet · About LEMON Manuals