Window operation, opening the soft top
WARNING: This page is about a different car, the 2011 Saab 9-3 and 2010 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- When the button for soft top operation is pressed, STC opens the soft top provided the conditions for soft top operation are approved.
- When the soft top is down and the cover is closed. The bus message "soft top status" is changed from "lower sequence" to "open". MIU indicates such with an audible signal.
- If the button for soft top operation is held in STC will send the bus messages "Request to move front windows", "Automatic opening" and "Request to move rear windows", "Automatic opening". The windows are operated by each respective door module to their lowest positions.
There is no difference between cars with pinch protection and those without.