Subsequent Work
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Install pressure pipe.
> WM, 214119 REMOVING AND INSTALLING PRESSURE PIPE (V8 BITURBO) "INSTALLING "
- Install intake manifold.
> WM, 212419 REMOVING AND INSTALLING INTAKE PIPE (V8 BITURBO) "INSTALLING "
- Install oxygen sensor on the turbocharger.
> 246919 REMOVING AND INSTALLING OXYGEN SENSOR UPSTREAM OF CATALYTIC CONVERTER (V8 BITURBO)
- Install primary catalytic converter at the right.
> 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER (V8 BITURBO) - SECTION ON "INSTALLING"
- If the turbocharger on bank 5-8 was removed, position and tighten the connecting clamp for the primary catalytic converter at the left (bank 5-8).
> Tightening torque 7 Nm (5 ftlb.) +/- 1 Nm (0.5 ftlb.)
- 5.1 Then install the turbocharger on bank 1-4.
- Checking engine-oil level.
- Check engine coolant level.