Preparing Wing Rail For Installation

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
Do not begin bonding work until all materials and tools necessary for later repair work are available.

Only for existing ground-down punch rivets: Copy the positions of the ground-down punch rivets -A and B- to the wing rail.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets
Only for existing ground-down punch rivets: Cut out punch rivets at the marked positions > Cut-outs.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cut-outs
Prepare marked areas > Wing rail for bonding.
>5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Wing rail