Preparing Connection Areas Of Body For Installing Outer Side Member
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Align the sealing surfaces and connections of the body.
- De-burr connection points and prepare them for joining.
- Prepare connection areas > Connection areas
for bonding, riveting and resistance spot-welding.
>5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Connection areas
Yellow Bonding and resistance spot-welding
> 5X00IN21 Working with body structural adhesiveOrange Bonding and riveting
> 5X00IN21 Working with body structural adhesive - Prepare connection areas > Connection areas
for applying a full aluminium weld using inert gas.
Connection areas