LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2023 >> Cayenne Base, 4D Utility Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (51 - Body Center, Roof, Frame 9YB) >> WM, 51095530 Replacing Rear Cross Member >> Removing Rear Cross Member

Removing Rear Cross Member

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove punch rivets > Punch rivets  using > VAS 852 001 - dent removal unit  and > VAS 6790 - compact booster  .

    >5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14347343Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets

  2. Heat bonding areas > Bonding areas  using > V.A.G 1416 - hot-air blower  .
    G14347344Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  3. Heat bonding areas on foam part of hinge reinforcement > Bonding area on foam part of hinge reinforcement  on both sides using > V.A.G 1416 - hot-air blower  .
    G14347345Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area on foam part of hinge reinforcement

  4. Remove rear cross member.
scientia non olet · About LEMON Manuals