Subsequent Work

Information 

The upper and lower part of the spoiler fins must be easy to remove and fit.

They must not be fitted using force.

The upper part of the spoiler fin must lock with an audible click during fitting.

1. Install windscreen.

   >*** 641219 Removing and installing windscreen

2. Only for North America (I-no.: ER3): 

   Install SDARS antenna.

   >*** 913819 Removing and installing SDARS antenna

3. Install rear lid.

   >559019 REMOVING AND INSTALLING REAR LID

4. Install roof sun blind.

   >*** 60701930 Removing and installing roof sun blind

5. Install spoiler fins -1 and 3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Spoiler fins

   1. 5.1  Install lower part of spoiler fins -3-  .
      1. 5.1.1  Position lower part of spoiler fins -3-  on the roof.
      2. 5.1.2  Insert clamping washer -5-  .
      3. 5.1.3  Screw in screws -4-  .
      4. 5.1.4  Align lower part of spoiler fins -3-  .
      5. 5.1.5  Tighten screws -4-  .

         > Tightening torque 2.8 (1.8 ftlb.1 Nm 

   2. 5.2  Install upper part of spoiler fins -2-  .
      1. 5.2.1  Push upper part of spoiler fin -2-  onto the lower part of spoiler fin -3-  from the front and lock it.
      2. 5.2.2  Check that upper part of spoiler fin -2-  is fitted securely and correctly.
      3. 5.2.3  Check that the spoiler fins -1 and 3-  are aligned correctly with the roof spoiler.

         If necessary: Detach spoiler fins -1 and 3-  again, adjust and re-fit them.

      >5X00IN41 GAP DIMENSIONS