Removing Inner Rear Wheel Housing

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect connection points.

1.1 Remove punch rivets using > VAS 852 001 - body dent removal system, aluminum and > VAS 6790 - compact booster .

>5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

G14349164

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points

G14349165

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points

G14349166

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points

1.2 Unscrew self-tapping screws

G14349167

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

G14349168

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

Heat bonding areas > Bonding afeas . > V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Heat bonding areas > Bonding afeas . > V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove inner rear wheel housing.