Installing Rear Boot Floor Plate

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive. 
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed. 
• Do not begin bonding work until all materials and tools necessary for later repair work are available. 

1. Install rear boot floor plate and check that it fits perfectly.
2. Apply adhesive on the joint area > Joint area for adhesive  of the body. > Application depth 0.5 mm 

   >5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Joint area for adhesive

3. Apply adhesive on the joint area > Joint area for adhesive  of the body. > Application depth 0.5 mm  >

   5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Joint area for adhesive

4. Apply adhesive on rear boot floor plate > Bonding areas  . > Application depth 0.5 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding areas

   1. 4.1  Also apply an adhesive bead of sealant all around the bonding surface. > Application depth 3 mm 
5. Apply adhesive on rear boot floor plate > Bonding areas  . > Application depth 0.5 mm 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding areas

   1. 5.1  Also apply an adhesive bead of sealant all around the bonding surface. > Application depth 3 mm 
6. Set blind rivets in areas -A-  . > BLIND RIVETS 999.190.227.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Blind rivets, bottom

7. Set blind rivets > Blind rivets, inner  . > BLIND RIVETS 999.190.227.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Blind rivets, inner

8. Screw in self-tapping screws -1-  .

   >5X00IN24 SETTING SELF-TAPPING SCREWS

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Self-tapping screws, inner

9. Screw in self-tapping screws -1-  .

   >5X00IN24 SETTING SELF-TAPPING SCREWS

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Self-tapping screws, lower