Installing Console

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Information

Apply adhesive evenly over the entire bonding surface.

Install console and check that it fits perfectly.
Apply adhesive on joint areas > Joint area of the body. > Application depth 0.5 mm
Working with body structural adhesive

>5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE - section on "Information"

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint area
Apply adhesive on the console > Joint areas . > Application depth 0.5 mm
Working with body structural adhesive

>5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE - section on "Information"

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint areas
1. 3.1 Also apply a bead of adhesive all around the bonding surface. > Application depth 3 mm
Set blind rivets > Bore holes . > BLIND RIVETS 999.190.229.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes