Removing Rear Closing Panel
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Remove self-tapping screws -1-
.
Self-tapping screws
- Remove punch rivets in areas -A and B-
using > VAS 852 001 - body dent removal system, aluminum
and > VAS 6790 - compact booster
.
>5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
Punch rivets
- Heat bonding areas > Bonding afeas
. > V.A.G 1416 - Hot-air blower
Bonding areas
- Remove rear closing panel.