Preparing Front Side Member For Installation
WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Fit in front side member and secure it to the body.
- Drill holes for blind rivets. > Diameter 6.6 mm
Holes for blind rivets
- Remove front side member.
- Prepare front side member > Bonding area
for bonding and riveting.
>5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE
Bonding area