Preparing Connection Areas Of The Front Side Member For Installing The Front Side Member (Front Section)

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Drill bores on the side member > Bores on inner side member > Bores on outer side member. > Diameter 9 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bores on inner side member

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bores on outer side member
De-burr bores on the front side member.
Prepare bonding areas on the front side member > Inner bonding areas > Inner bonding areas for bonding.
>5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner bonding areas

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner bonding areas