Removing (Outer Part Of) Longitudinal Member For Wheel Housing Upper Section

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect connection points.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection points
1. 1.1 Unscrew self-tapping screws -1- .
2. 1.2 Remove punch rivets -A - using > VAS 852 001 - dent removal unit and > VAS 6790 - compact booster .
  >5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
3. 1.3 Drill out spotwelds -B- .
Open welded seams.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welded seams
Heat bonding areas. > V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove (outer part of) longitudinal member for wheel housing upper section.