Removing Spring Strut Mount

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect connection points.

1.1 Unscrew self-tapping screws -1- .

Fig 1: Spring Strut Mount Component Location
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

1.2 Remove punch rivets -A - using > VAS 852 001 - dent removal unit and > VAS 6790 - compact booster .

>5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets

1.3 Drill out spotwelds -B-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Spotwelds

Heat bonding area. > V.A.G 1416 - Hot-air blower

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Grind off welded seam -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welded seam
Remove spring strut mount.