Preparing Connection Areas Of Body For Installing Spring Strut Mount

WARNING: This page is about a different car, the 2021 Porsche Cayenne and 2020 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

Align the sealing surfaces and connections of the body.
De-burr connection areas and prepare for joining.
Prepare spring strut mount in area -A - for welding.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welding areas
Prepare spring strut mount in area -B - for plug-welding.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Plug-weld areas
Prepare spring strut mount in area -C - for bonding and riveting.
>5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas