Installing seat cross member
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
- The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
- Do not begin bonding work until all materials and tools necessary for later repair work are available.
Information
- Position the seat cross members with the seat installed.
- Install the seat cross members and check that they fit perfectly. Check gap dimensions.
- Apply adhesive. > Application depth 3.0 mm
Working with body structural adhesive
5X00IN41 GAP DIMENSIONS - "INSTALLING" SECTION
Applying adhesive
- Rivet-in the seat cross members. > BLIND RIVET 999.190.227.01