Installing (Rear) Roll-Over Bar Reinforcement

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Information

Shown on driver's side; the steps are identical for the passenger's side.

> ADHESIVE 000.043.206.30 must be applied to the prepared bonding area of the (rear) roll-over bar reinforcement -1- in the marked areas.
5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Apply adhesive
Insert (rear) roll-over bar reinforcement and align with the bores you have made.
Rivet in (rear) roll-over bar reinforcement -1- areas -A- using > BLIND RIVET 999.190.227.01.
5X00IN83 CONNECTING ELEMENTS FOR BODY REPAIRS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Riveting in (rear) roll-over bar reinforcement