Adjusting rear lid in x and y direction

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Adjust gap dimensions of rear lid -1- with respect to the roof.
1. 1.1 Loosen nuts -2 and 3- on the lid hinge on the roof on both sides. ¹⁾
2. 1.2 Adjust the rear lid by moving it.
  5X00IN GAP DIMENSIONS
¹⁾ Only loosen as far as required until the lid can be moved.
Tighten nuts -2 and 3- , > Tightening torque 23 N.m (17 ft.lb)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adjusting rear lid
Adjust the height of the rear lid -3- with respect to the body.
1. 3.1 Loosen screws -1 and 2-. ²⁾
2. 3.2 Adjust the rear lid -3- moving it.
  5X00IN GAP DIMENSIONS
  
  ²⁾ Only loosen as far as required until the lid can be moved.
Tighten the screws. > Tightening torque 10 N.m (7.5 ft.lb)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Adjusting rear lid