LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 507455 Replacing Front Wheel Housing >> Removing Front Wheel Housing >> Preparing Front Wheel Housing For Installation

Preparing Front Wheel Housing For Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit front wheel housing and secure it to the body. Check gap dimensions.

    5X00IN DIAGRAM - BODY GAP DIMENSIONS

    1. 1.1  Drill bores for the rivets through the existing holes. > Diameter 6.5 mm 
  2. Prepare connection areas on the front wheel housing for bonding.

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE

    G14269480Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Connection areas on wheel housing

scientia non olet · About LEMON Manuals