Installing Front Wheel Housing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT:

Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
Do not begin bonding work until all materials and tools necessary for later repair work are available.

Apply adhesive. > Application depth 3.0 mm
Working with body structural adhesive

5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Applying adhesive

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Applying adhesive

Rivet in front wheel housing.

2.1 Rivet in front wheel housing in area -1- > BLIND RIVET 999.190.227.01 .

2.2 Rivet in front wheel housing in area -22- > BLIND RIVET 999.190.230.01 .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing front wheel housing

Rivet in front wheel housing. > BLIND RIVET 999.190.227.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing front wheel housing
Rivet in front wheel housing. > BLIND RIVET 999.190.227.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing front wheel housing