LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 507255 Replacing Longitudinal Member For Wheel Housing Upper Section >> Preparing Longitudinal Member For Wheel Housing

Preparing Longitudinal Member For Wheel Housing

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit outer upper longitudinal member.

    Check gap dimensions.

    5X00IN DIAGRAM - BODY GAP DIMENSIONS

    1. 1.1  Drill holes for rivets through the existing holes using a drill bit with a diameter of > Diameter 6.6 mm  .
      G14269414Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Outer upper longitudinal member

  2. Fit upper longitudinal member.

    Check gap dimensions.

    5X00IN DIAGRAM - BODY GAP DIMENSIONS

    1. 2.1  Drill holes for rivets through the existing holes using a drill bit with a diameter of > Diameter 6.6 mm  .
      G14269415Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Upper longitudinal member

scientia non olet · About LEMON Manuals