LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 503955 Replacing Spring Strut Mount >> Installing Spring Strut Mount

Installing Spring Strut Mount

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
  • The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
  • Do not begin bonding work until all materials and tools necessary for later repair work are available.
  1. Apply adhesive. > Application depth 3.0 mm 

    Working with body structural adhesive

    5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE - SECTION ON "INFORMATION"

    G14269325Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Applying adhesive

    G14269326Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Applying adhesive

  2. Rivet in spring strut mount. > BLIND RIVET 999.190.227.01 
    G14269327Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Riveting in spring strut mount

    G14269328Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Riveting in spring strut mount

scientia non olet · About LEMON Manuals