LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 502355 Replacing Luggage Compartment Bracket >> Installing Luggage Compartment Bracket

Installing Luggage Compartment Bracket

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply adhesive. > Application depth 5 mm 
    G14269302Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

    G14269303Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

    G14269304Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  2. Fit luggage compartment bracket.
  3. Rivet in luggage compartment bracket.
    1. 3.1  Rivet in areas shown using > BLIND RIVET 999.190.228.01  .
      G14269305Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Counter bores

    2. 3.2  Rivet in areas shown using > BLIND RIVET 999.190.230.01  .
      G14269306Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Installing luggage compartment bracket

    3. 3.3  Rivet in areas shown using > BLIND RIVET 999.190.227.01  .
      G14269307Courtesy of PORSCHE CARS NORTH AMERICA, INC.
      G14269308Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Installing luggage compartment bracket

      G14269309Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Installing luggage compartment bracket

    4. 3.4  Rivet in areas shown using > BLIND RIVET 999.190.229.01  .
      G14269310Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Installing luggage compartment bracket

  4. Make ground connections.
    1. 4.1  Drill bores for ground connections. > Diameter 8.2 mm 
      G14269311Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Screw-on points for ground connection

    2. 4.2  Make ground connection using a screw and nut.

      5X00IN25 MAKING GROUND CONNECTIONS

      > COUNTERSUNK SCREW 999.073.549.01  > HEXAGON NUT 900.377.003.01  > Tightening torque 15 N.m (11 ft.lb) 

      G14269312Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Ground connections

    3. 4.3  Carefully seal screw heads and nuts.