Subsequent Work For Body Repairs (With Straightening System)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
- Remove vehicle from the straightening system.
- Clean joint areas and sheetmetal flanges with a wire brush.
- Prime joint areas and sheetmetal flanges with 2K primer.
- Restore standard seal with body sealant
Also seal the repair area carefully.
- Paint repair area and adjacent surfaces, if necessary.
- Restore standard underbody protection with underbody sealant
- Apply standard cavity preservation
Also carefully apply cavity preservation to the repair area.
- Install removed accessories in the repair area.