LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2022 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (50 - Body Front) >> WM, 501455 Replacing Front Panel >> Preliminary Work >> Preliminary Work For Body Repairs (With Straightening System)

Preliminary Work For Body Repairs (With Straightening System)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2021 Porsche 718 Cayman, 2021 Porsche 718 Boxster, 2020 Porsche 718 Cayman, 2020 Porsche 718 Boxster, and 2019 Porsche 718 Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove accessories in the repair area.
    1. 1.1  Remove add-on parts in the repair area according to the extent of damage on the vehicle.
  2. Set vehicle on the straightening system.
  3. Cover the add-on parts adjacent to the repair area on the vehicle.
    1. 3.1  Cover all add-on parts remaining on the vehicle and adjacent areas with fire-proof protective covers.
  4. Reshape connection area of the sheetmetal parts to be replaced. See Information on aluminum repairs

    5X00IN04 INFORMATION ON ALUMINUM REPAIRS

  5. Expose joint areas.
    1. 5.1  Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals