LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (19 - Engine - Cooling 2.9L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 197819 Removing And Installing Coolant Temperature Sensor (Engine Temperature Control) (V6 BITURBO) >> Installing Coolant Temperature Sensor (Cylinder Housing)

Installing Coolant Temperature Sensor (Cylinder Housing)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.
  2. Replace O-rings.
  3. Screw in and tighten screw > Tightening torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals