Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Nut on chiller holder |
M5 |
Tightening torque |
6 Nm (4.5 ftlb.) |
|
|
| Screws on chiller holder |
M6 |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| Nuts for change-over valve for low-temperature system (UVW1) |
|
Tightening torque |
8 Nm (6 ftlb.) |
|
|