Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Install strut -4- .

1.1 Position strut -4- and screw in screw -5- and -6- .

Tightening torque for screw -5- securing strut to chassis subframe: > Initial tightening 20 Nm (15 ftlb.) > Final tightening + 90°

Tightening torque for screw -6- securing strut to reinforcement: > Tightening torque 20 Nm (15 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing strut

Secure electric lines to strut -4- .
1. 2.1 Fit bracket -2- with electric lines and screw in and tighten nut -1- > Tightening torque 4 Nm (3 ftlb.)
2. 2.2 Clip electric line -3- into strut -4- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Securing bracket and clipping in electric line
Fill in coolant and bleed the cooling system.
> 193817 DRAINING AND FILLING COOLANT (INCLUDES BLEEDING)
Install front trim panel (engine compartment) at the right.
> WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) - Coupe or WM, 700219 REMOVING AND REINSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) - Wagon
Install cover for front lock support.
> WM, 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT - Coupe or WM, 703919 REMOVING AND INSTALLING COVER FOR FRONT LOCK SUPPORT - Wagon
Connect the battery.
> 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY