Removing Motor For Cooling-Air Flaps

WARNING: This page is about a different variant/trim than selected.

Remove housing for cooling-air flaps -1- .
1. 1.1 Unscrew screws -2- .
2. 1.2 Loosen the top holder (2 parts) -3- and the bottom holder (2 parts) -4- from the housing for the cooling air flaps -1- .
3. 1.3 Remove housing for cooling-air flaps -1- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Housing for cooling-air flaps
Remove motor for cooling-air flaps -1- .
1. 2.1 Unscrew screws -2- .
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cooling-air flap motor