Subsequent Work
- Additional work for Cabriolet vehicles: Installing support plate
> Refer to appropriate Rear Wheel Suspension Drive Shaft article
- Additional work for all-wheel drive vehicles: Install cover for centre underbody.
- Install Cardan shaft.
- Check transmission oil and top up if necessary.
- Perform function test on the shift and selector cables.
- Installing rear underbody cover.
- Check the coolant level and top up if necessary.
- Bleed the cooling system.
- Lower the vehicle and remove it from the lifting platform.
> Refer to appropriate Chassis article
- Fasten ground strap for battery.