Subsequent Work

For left or right front pressure lines:

1. Install fuel tank.

   201019 REMOVING AND INSTALLING FUEL TANK - information on "Installing"

2. Fitting front wheel.

   440519 REMOVING AND INSTALLING WHEEL - information on "Installing"

   or →

   440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - information on "Installing"

   For hydraulic pump pressure line: 

3. Install rear underbody cover.

   >  WM, 519419 REMOVING AND INSTALLING REAR COVER  - information on "Installing" 

4. Bleed and fill the level control.

   430117 BLEEDING AND FILLING THE LEVEL CONTROL (FRONT AXLE LIFT SYSTEM) 

5. Bleed the level control.

   430107 BLEEDING THE LEVEL CONTROL (FRONT AXLE LIFT SYSTEM)