Subsequent Work

1. Installing rear wheel.

   > 440519 Removing and installing wheel - section on  "INSTALLING ".

   GT4 RS/RS Spyder: 

   > 440519 Removing and installing wheel with central bolt - section on "INSTALLING ".

   Information 

   • The help of another person is required. 
2. Screw on axle nut (drive shaft to wheel hub) and tighten.

   > Tightening torque 460 N.m (339.3 ft lb.) 

To tighten the axle nut, the vehicle must be standing on its wheels and get another person to help by pressing the brake.