Subsequent Work
- Fit wheel.
> 440519 Removing and installing head airbag - section on "INSTALLING ".
> 440519 Removing and installing wheel with central bolt - section on "INSTALLING ".
- Fit and tighten new lock nut M22 x 1.5 on the tension bolt for the wheel bearing housing.
Get another person to help you to actuate the brake.
> Tightening torque 460 N.m
- Install rear cover.
> WM, 852219 REMOVING AND INSTALLING TECHNICAL EQUIPMENT SPACE COVER - section on "Installing".
- Check wheel alignment values on the front axle and make adjustments if necessary.