LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (47 Brakes- Brake Hydraulic System, Regulator, Booster 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 474119 Removing And Installing Rear Brake CALLIPER >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Bleed the brake system.

    > 470107 BLEEDING THE BRAKE SYSTEM 

  2. Check brake fluid level and correct it if necessary

    > 470801 CHECKING BRAKE FLUID LEVEL 

    NOTIFICATION 

    Removing/fitting wheels 

    • Risk of damage to (ceramic) brake discs 

      → Carefully guide the wheel towards the wheel hub, thereby preventing any heavy impact on the (ceramic) brake disc.

  3. Install wheel.

    > 440519 REMOVING AND INSTALLING WHEEL

    For vehicles with PCCB:  Use assembly aids (twit assembly pins) -1-  .

    G14948314Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Wheel assembly pins (shown as an example)