Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Installing rear wheel.
> 440519 REMOVING AND INSTALLING WHEEL - article on "Installing"

GT4 RS:

> 440519 REMOVING AND INSTALLING WHEEL WITH CENTRAL BOLT - article on "Installing"

Information
- The help of another person is required.
Screw on axle nut (drive shaft to wheel hub) and tighten.
> Tightening torque 460 Nm (339.3 ftlb.)

To tighten the axle nut, the vehicle must be standing on its wheels and get another person to help by pressing the brake.