LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (42 Rear Wheel Suspension Drive Shaft 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 422119 Removing And Installing Drive Shaft >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.

Information 

  1. Loosen axle nut (driveshaft screw connection on wheel hub).

    To loosen the axle nut, the vehicle must be standing on its wheels and get another person to help by pressing the brake. 

  2. Removing rear wheel.

    > 440519 REMOVING AND INSTALLING WHEEL - article on "Removing"

    GT4 RS: 

    > Refer to the appropriate Service Information for Removing and installing wheel with central bolt - article on "Removing"