LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (48 Steering 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 487919 Removing And Installing Tie Rod >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Raise the vehicle

    > 4X00IN LIFTING THE VEHICLE

  2. Remove the relevant wheel

    > 440519 REMOVING AND INSTALLING WHEEL - article on "Removing"

  3. Remove front underbody cover

    > WM, 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY

  4. Remove tie-rod ball

    > 488119 REMOVING AND INSTALLING TIE-ROD BALL (TIE-ROD END)  - article on "Removing"

  5. Remove bellows for steering-gear housing

    > 485319 REMOVING AND INSTALLING BELLOWS STEERING-GEAR HOUSING