LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (19 - Engine - Cooling 4.0L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 195819 Removing And Installing Coolant Regulator (Thermostat Insert) (V8 BITURBO) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install cooling fan housing (radiator frame).

    > 192019 REMOVING AND INSTALLING COOLING FAN HOUSING (RADIATOR FRAME) 

  2. Fill up coolant.

    > WM, 193817 DRAINING AND FILLING COOLANT 

  3. Only for V6 monoturbo:  Install Centre intake-air distributor.

    > Removing and installing Centre intake-air distributor (V6 monoturbo) 

scientia non olet · About LEMON Manuals