Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screw securing reinforcement to module carrier | Item 1 | Tightening torque | 20 Nm (15 ftlb.) | ||
|
Reinforcement on module carrier |
|||||
| Side strut to body | Hexagon-head bolt, M8 x 45/always replace bolts following removal | Initial tightening | 20 Nm (15 ftlb.) | ||
| Side strut to body | Hexagon-head bolt, M8 x 45/always replace bolts following removal | Final tightening | + 90° | ||
| Connection point holder to side strut | Hexagon nut, M5 | Tightening torque | 4 Nm (3 ftlb.) | ||
| Expansion tank to body | M6 x 20 | Tightening torque | 8 Nm (5.9 ftlb.) | ||
| Nut on positive cable (generator/starter) | Tightening torque | 9.7 Nm (7.5 ftlb.) | |||