LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2018 >> Macan GTS >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (60 - Sliding Roof, Tilting Roof -- CARRERA (997)) >> WM 600619 Removing And Installing Roof Module (911 TARGA 4, 911 TARGA 4S) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear window cover. → INSTALLING REAR WINDOW COVER
  2. Install rear three-point belt. → INSTALLING REAR THREE-POINT BELT 
  3. Install adjustment fitting (seat belt height adjuster). → INSTALLING ADJUSTMENT FITTING (SEAT BELT HEIGHT ADJUSTER) 
  4. Install rear side trim panel.→ INSTALLING REAR SIDE TRIM PANEL 
  5. Install front roof trim panel. → INSTALLING FRONT ROOF TRIM PANEL 
  6. Install roof rail trims. → INSTALLING ROOF RAIL TRIM 
  7. Install trim panel for rear wall. → INSTALLING TRIM PANEL FOR REAR WALL 
  8. Install cover for rear lock support. → INSTALLING COVER FOR REAR LOCK SUPPORT 
scientia non olet · About LEMON Manuals