Subsequent Work For Loosening And Securing Main Wire Harness In Luggage Compartment At The Right

Vehicles with PASM 

1. Install PASM control unit. → 431619 REMOVING AND INSTALLING PASM CONTROL UNIT - SECTION ON "INSTALLING"

   All vehicles 

2. Install rear wheel housing liner at the right. → 536919 REMOVING AND INSTALLING REAR WHEEL HOUSING LINER - SECTION ON "INSTALLING"
3. Install rear right wheel. → 440519 REMOVING AND INSTALLING WHEEL - SECTION ON "INSTALLING"
4. Install filler flap. → 553755 REPLACING FILLER FLAP
5. Install right tail light. → 943119 REMOVING AND INSTALLING TAIL LIGHT - SECTION ON "INSTALLING"
6. Install power distributor. → 978919 REMOVING AND INSTALLING POWER DISTRIBUTOR - SECTION ON "INSTALLING" 
7. Install cover for rear lock support. → 703919 REMOVING AND INSTALLING COVER FOR REAR LOCK SUPPORT - SECTION ON "INSTALLING"
8. Install trim panel for luggage compartment (luggage compartment cover) at the right side. → 700619 REMOVING AND INSTALLING TRIM PANEL FOR LUGGAGE COMPARTMENT (LUGGAGE COMPARTMENT COVER) AT THE SIDES - SECTION ON "INSTALLING"
9. Remove rear-end electronics control unit and holder for rear-end electronics control unit. → 578919 REMOVING AND INSTALLING CONTROL UNIT FOR REAR-END ELECTRONICS - SECTION ON "INSTALLING"
10. Install side trim panel for rear luggage compartment at the right. → 700319 REMOVING AND INSTALLING SIDE TRIM PANEL FOR REAR LUGGAGE COMPARTMENT - SECTION ON "INSTALLING"
11. Install headliner. → 708419 REMOVING AND INSTALLING HEADLINER - SECTION ON "INSTALLING"
12. Install the battery. → 270619 REMOVING AND INSTALLING BATTERY - SECTION ON "INSTALLING"