Preliminary Work
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Incorrect handling of high-voltage components
- Electric shock
- Short circuit
- Fire
- Explosion
→ Only appropriately trained and authorized persons may work on high-voltage vehicles and components.
→ Required qualification: High voltage technician or high voltage expert.
→ Observe national requirements and legislation for this work.
→ Always use insulated tools, such as an > VAS 6883 - insulated tool set when working on these parts.
→ Observe general warning notices for working on the high-voltage system.
> 2X00IN GENERAL WARNING NOTICES FOR WORKING ON THE HIGH-VOLTAGE SYSTEM
- Remove transmission.
> 373427 Removing and mounting double clutch transmission (V6 Hybrid) - information on "REMOVING "
or
> 373427 Removing and mounting double clutch transmission (V8 Hybrid) - information on "REMOVING "
- Remove left drive shaft.
- Remove torsional vibration damper -1-
.
Torsional vibration damper
- 3.1 Mark installation position of torsional vibration damper -1- with respect to shaft of electric motor -2- .
- 3.2 Remove torsional vibration damper -1- from shaft of electric motor -2- .