LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (27 Starter, Power Supply, Cruise Control 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 270519 Removing And Installing Battery Sensor >> Removing Battery Sensor

Removing Battery Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Voltage peaks 
  • Risk of damage to electrical load or to the control unit 

    → Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

    → Switch off electrical loads before disconnecting or removing them.

  1. Disconnect ground terminal with battery sensor -1-  from the battery.

    > 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY

    G15879643Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Ground terminal

  2. Release and disconnect electric plug connection -1-  on the battery sensor.
    G15879644Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection

  3. Unscrew fastening nut -1-  and remove ground line with battery sensor -2-  .
    G15879645Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fastening nut

scientia non olet · About LEMON Manuals