LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (47 Brakes - Brake Hydraulic System, Regulator, Booster 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 471019 Removing And Installing Brake Fluid Reservoir >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Observe general warning notes for working on the high-voltage vehicle electrical system.

    > WM, 2X00IN GENERAL WARNING NOTES FOR WORKING ON THE HIGH-VOLTAGE SYSTEM

  2. Fill brake fluid into the brake fluid reservoir until the brake fluid level is between MIN and MAX.
  3. Remove any emerging brake fluid immediately using suitable aids; clean affected components with water and dry them.
  4. Install the cowl panel cover.

    > WM, 508719 REMOVING AND INSTALLING COWL PANEL COVER