LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 778 (17 - Engine - Lubrication) >> WM 175019 Removing and installing oil pan (oil guide housing) >> Preliminary work

Preliminary work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure engine to assembly support. → 1001IN SECURING ENGINE ON ASSEMBLY SUPPORT (MOUNTING BRACKET)
  2. Remove turbocharger. → 213019 REMOVING AND INSTALLING TURBOCHARGER
  3. Remove generator. → 272219 REMOVING AND INSTALLING GENERATOR
  4. Remove air-conditioning compressor. → 873419 REMOVING AND INSTALLING AIR-CONDITIONING COMPRESSOR
  5. Remove engine supports at the left and right.
  6. Remove crankshaft pulse sender. → 287319 REMOVING AND INSTALLING CRANKSHAFT PULSE SENDER
  7. Remove oil-pressure sender. → 170419 REMOVING AND INSTALLING OIL-PRESSURE SENDER 
  8. Remove sender for oil level sensor. → 171119 REMOVING AND INSTALLING OIL LEVEL SENSOR 
  9. Remove pulley. → 137619 REMOVING AND INSTALLING PULLEY (VIBRATION BALANCER)
  10. Remove lower part of oil pan. → 175019 REMOVING AND INSTALLING OIL PAN 
scientia non olet · About LEMON Manuals