LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Macan S >> Repair and Diagnosis >> External Pages >> Different car >> Section 776 (87 - Air Conditioning) >> WM 874319 Removing and installing compressor/condenser line >> Subsequent work

Subsequent work

WARNING: This page is about a different car, the 2016 Porsche Macan and 2015 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.

Compressor/wheel housing section: 

  1. Install wheel housing liner at the left → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER .
  2. Fill in refrigerant → 870317 DRAINING AND FILLING REFRIGERANT .

    The following work must also be carried out for the wheel housing/condenser section: 

  3. Install cooling air flaps → 193519 REMOVING AND INSTALLING COOLING AIR FLAPS .
  4. Install front air guide → 192419 REMOVING AND INSTALLING AIR GUIDE .
  5. Install control unit for distance measuring sensor, if installed → 278519 REMOVING AND INSTALLING CONTROL UNIT FOR DISTANCE MEASURING SENSOR .
  6. Install front apron → 631519 REMOVING AND INSTALLING FRONT APRON .
scientia non olet · About LEMON Manuals